KFAS: Fanuc CNC Parts, Service, & Repair

Ready to place an order? Follow the links below:

SPM-2.2 A06B-6078-H202#H500 or #H501

SPM-5.5 A06B-6078-H206#H500 or #H501

SPM-11 A06B-6078-H211#H500 or #H501

SPM-15 A06B-6088-H215#H500 or #H501

SPM-22 A06B-6088-H222#H500 or #H501

SPM-26 A06B-6088-H226#H500 or #H501

SPM-30 A06B-6088-H230#H500 or #H501

SPM-45 A06B-6088-H245#H500 or #H501

Are you located in Houston area?

(SPM) Type 2 (Cs Contour Control/BZ Sensor (separate built in sensor) Specification)

SPM-2.2 A06B-6078-H302#H500 or #H501

SPM-5.5 A06B-6078-H306#H500 or #H501

SPM-11 A06B-6078-H311#H500 or #H501

SPM-15 A06B-6088-H315#H500 or #H501

SPM-22 A06B-6088-H322#H500 or #H501

SPM-26 A06B-6088-H326#H500 or #H501

SPM-30 A06B-6088-H330#H500 or #H501

SPM-45 A06B-6088-H345#H500 or #H501

(SPM) Type 3 (Spindle Switching Control/Differential Speed Control Specification)

SPM-15 A06B-6088-H415#H500 or #H501

SPM-22 A06B-6088-H422#H500 or #H501

SPM-26 A06B-6088-H426#H500 or #H501

SPM-30 A06B-6088-H430#H500 or #H501

SPM-45 A06B-6088-H445#H500 or #H501

Fanuc Spindle, Servo Amplifier and Power Supply Module advantages include
The energy efficient solution with power source regeneration and low loss power devices. 
• Modular structure with α PSM (power supply), α SPM (spindle amplifier), and α SVM (servo amplifier) 
• Compact amplifier unit for 1 spindle & 3 axes 
• Built-in Leakage Detection function 
• Safe Torque Off function in servo and spindle amplifier 
• Equipped with both the external and internal cooling fans for effective operation
• Quick maintenance by circuit board and fan replacement without disassembly
• 75/100kW spindle amplifier (400V) with high-efficiency SIC (silicon carbide) power circuit available 
• Various power supply modules αiPSs-B with sinusoidal input – stabilized DC link 
• SSM modules for voltage protection of spindle and servo amplifier

Spindle amplifier module (SPM) 
The spindle amplifier module (SPM) is used to drive a spindle motor. 
A SPM is selected according to the spindle motor connected to the SPM. 
There are three types of spindle amplifier module, as follows: 
<1> Spindle amplifier module (SPM) This module drives a spindle motor of the 200-V input series. 
<2> Spindle amplifier module (SPMC) This module drives the αCi series spindle motor. 
<3> Spindle amplifier module (SPM-HV) This module drives a spindle motor of the 400V input series. 

SPM - x HV i 
(A)     (B) (C) 

(A) Model name: 
SPM = Spindle amplifier module 
SPMC= Spindle amplifier module applied to spindle αCi series 

(B) Output: Numeric value representing the 30-minutes rating of a matching standard motor (αi) in kW 

(C) For an amplifier supporting 400-V input, "HV" is added.

© Copyright KFASLLC Houston, Texas, USA