Fanuc Alarm SV0024 SP9204 AL-15 Alarm Information by KFASLLC

KFAS: Fanuc CNC Parts, Service, & Repair

Fanuc ALARM SV0024 SP9204 aiPS-B AL-15

Alarm SV0024 and SP9204 on Fanuc 0iF or 31iB and AL-15 on aiPS-B means,
the estimated temperature value of the power element (IGBT) in the main circuit has become
abnormal.
Or, the estimated winding temperature value of the AC reactor has become abnormal.
Cause and troubleshooting
(a) Overloaded operation
→ Review the operation of the motor.

- Replace the Power Supply Module.

A06B6200 aiPS-B B65515EN Maintenance Manual

*CAUTION: High Voltage present.
Note: Some Machine's electrical cabinet doors are equipped with "door interlock" that will cause the breaker to trip when the door is open.
See the machine's manual for information on how to bypass so that you can observe the alarm LED status

This alarm is applicable for the following units

A06B-6200-H003 αiPS 3-B
A06B-6200-H008 αiPS 7.5-B
A06B-6200-H011 αiPS 11-B
A06B-6200-H015 αiPS 15-B
A06B-6200-H026 αiPS 26-B
A06B-6200-H030 αiPS 30-B
A06B-6200-H037 αiPS 37-B
A06B-6200-H055 αiPS 55-B

A06B-6202-H003 αiPS 3-B
A06B-6202-H008 αiPS 7.5-B
A06B-6202-H011 αiPS 11-B
A06B-6202-H015 αiPS 15-B
A06B-6202-H026 αiPS 26-B
A06B-6202-H030 αiPS 30-B
A06B-6202-H037 αiPS 37-B
A06B-6202-H055 αiPS 55-B

Fanuc CNC Alarm App for your smart phone