Alarm Code 02 (SV0443, SP9059)

KFAS: Fanuc CNC Parts, Service, & Repair

K Factory Automation Services has large inventory of Fanuc parts in stock and we maintain a full service in-house repair facility.

SV0443 SP9059 alarm on Fanuc 30iB control with Alpha i-B amplifiers (Fanuc Manual B-65285EN)

Alarm Code 02 (SV0443, SP9059)
(1) Meaning
An abnormal condition has been detected in the internal cooling fan.
(2) Cause and troubleshooting
(a) Failure in the internal cooling fan
Check the rotation of the internal cooling fan.
→ If the internal cooling fan has stopped rotating, replace it.
(b) The internal cooling fan is not correctly attached.
Push the internal cooling fan into the top of the Power Supply as far as it will go.
If it does not go in easily, pull it out and then push it in again.
(c) The control printed circuit board is not correctly attached.
Push in the control printed circuit board in the front section of the Power Supply as far as it will
go. If it does not go in easily, pull it out and then push it in again.
(d) The Power Supply is defective.
Replace the Power Supply.

SV0443 SP9059 (Fanuc Manual B-65285EN)

This alarm is applicable for the following units

A06B-6200-H003 αiPS 3-B
A06B-6200-H008 αiPS 7.5-B
A06B-6200-H011 αiPS 11-B
A06B-6200-H015 αiPS 15-B
A06B-6200-H026 αiPS 26-B
A06B-6200-H030 αiPS 30-B
A06B-6200-H037 αiPS 37-B
A06B-6200-H055 αiPS 55-B

A06B-6202-H003 αiPS 3-B
A06B-6202-H008 αiPS 7.5-B
A06B-6202-H011 αiPS 11-B
A06B-6202-H015 αiPS 15-B
A06B-6202-H026 αiPS 26-B
A06B-6202-H030 αiPS 30-B
A06B-6202-H037 αiPS 37-B
A06B-6202-H055 αiPS 55-B